寒冷地区亚麻废水处理工艺的对比分析

亚麻废水是一种较难降解的废水,采用气浮-完全推流曝气工艺和UASB法处理亚麻加工厂废水,从能耗、工艺特点、运行管理上进行对比。结果表明,采用气浮-完全推流曝气工艺在处理此类废水中可收到良好成效,且废水处理成本为0.6-0.7元/m3。     

基于资源环境承载力的全国造纸工业类型区划分研究

本文从造纸行业特征、资源消耗、污染物排放等方面入手,结合区域资源环境承载力,分析行业发展可能带来的环境污染问题.分析造纸行业发展与其所需主要资源间的空间布局关系,明确选定行业发展的资源、环境和生态制约条件.结合造纸行业特点,从环境约束、生态约束和资源约束入手,构建其环境管理类型区划分的指标体系;采用层次分析法、灰色定权聚类分析等方法对分区数据进行必要处理,采用二维判断矩阵法等方法进行环境管理类型区划分,对实施针对造纸行业分区域、分类别、差别化的环境管理提供了决策依据和方法基础.     

浅析吉林省危险废物经营许可证管理现状及政策建议

本文针对吉林省危险废物经营许可证颁发情况进行了分析,截止2011年底,颁发危险废物经营许可证63份,核准经营总规模为1095816吨,其中利用量为1010016吨,处置量为85800吨;总结归纳了危险废物经营单位规范化管理过程中发现的问题,并对吉林省危险废物经营许可证管理提出了合理化的意见和建议。     

上海市工业固体废物处理处置现状分析

详细分析了上海市一般工业固体废物及工业危险废物的产生及处理处置现状,提出:一般工业固废主要以资源化利用为主,危废处置企业实行末位淘汰,实现清洁生产;加强国家提倡的"三位一体"综合处理项目建设,实现集中处理、集中监管,降低运营成本;加强工业危废产生企业申报登记及转移的网络信息化管理,杜绝监管盲区。     

The method for leakage detection of urban natural gas pipeline based on the improved ITA and ALO

To solve the problems of the difficulty in early leakage monitoring and larger positioning error for urban hazardous chemicals pipelines, the optimized method based on the improved Inverse Transient Analysis (ITA) and Ant Lion Optimizer (ALO) was proposed. Firstly, based on the obtained experiment's results of leakage of natural gas in the non-metallic pipeline, the segment classification method was incorporated into the pressure gradient calculation. The modified method can adapt to the multi-node characteristics of urban pipe networks and help to obtain the preliminary positioning calculation results after optimization. Then the calculation results were embedded in the ITA calculation model. The input parameters of the gas pipeline such as boundary conditions, leakage rate and friction coefficient were used to establish the characteristic linear equations. Then the objective function of the least-squares criterion was defined, and the improved ITA model suitable for leakage detection of urban natural gas pipeline networks was constructed. Finally, the ALO was used to optimize the calculation process of the improved ITA model, and iteratively optimize the optimal friction coefficient and its corresponding minimum objective function (OF) value. As a result, a more precise location of the leakage source was calculated. The validation of the modified method is conducted by comparing the calculated values with the experiment's results. The results show that the method can accurately predict the location where the pipeline leakage occurs. The minimum error is 3.17%. Compared with the traditional ITA, this method not only accelerates the convergence speed of the objective function, but also improves the accuracy of location calculation.     

排土场稳定性影响因素显著性研究

为提升排土场稳定性,以某露天煤矿排土场为例,结合正交试验和强度折减法,开展排土场稳定性影响因素显著性研究。通过分析资料与野外调研,厘定典型排土场稳定性诱发因素,构建排土场真三维地质模型,反演验证和分析排土场的岩土体参数和变形规律特征,得出排土场边坡内部应力和位移的变化特征以及塑性破坏区分布范围;以真三维网格模型中最危险截面为依据构建理想模型,设计正交试验模拟方案并开展数值模拟,对模拟结果进行方差分析,寻求显著影响因素。研究结果表明:台阶数量、台阶高度、气象水文和台阶角度等对排土场稳定性的影响为极显著;台阶宽度对排土场稳定性的影响为显著。     

分类收集蔬菜垃圾与植物废弃物混合堆肥工艺实例研究

以分类收集的生活垃圾(主要为蔬菜垃圾)和破碎树枝为原料,采用条垛式堆肥工艺,在中试规模条件下考察了原料初始含水率、通风频率、翻堆频率、接种比例4种因素对混合堆肥效果的影响.同时,在试验的9种工况下,对温度、氧浓度、有机碳降解率、有机碳氮比(C/N)、腐殖质含量等指标进行测定.结果表明,堆肥42d时各堆体均已达到稳定化要求.经过比较肥分保持、腐殖化程度和能量投入等指标,获得的最优堆肥控制条件为:初始含水率65%,通风频率15min/60min(开/关),翻堆频率为每3d1次,产物接种比例5%.最优控制方案下的主发酵通风率仅为0.03L.min-1.kg-1(以VS计),可实现堆肥过程的低能耗,适合于我国村镇区域的应用条件.     

Classification of different sustainable flood retention basin types

Using a revised version of a previously published expert classification system, a database of potential Sustainable Flood Retention Basins has been developed for Scotland. The research shows that the majority of small and former (often old) drinking water reservoirs are kept full and their spillways are continuously in operation. Utilising some of the available capacity to contribute to flood control could significantly reduce the costs of complying with the European Union Flood Directive. Furthermore, the application of a previously developed classification model for Baden in Germany for the Scottish data set showed a lower diversity for basins in Scotland due to less developed infrastructure. The classification system appears to be robust and has the potential, with minor modifications, to be applied across Europe. The principle value of this approach is a clear and unambiguous categorisation, based on standard variables, which can help to promote communication and understanding between stakeholders.     

杨凌生活垃圾处置方法的可行性分析

根据对杨凌城区不同功能区生活垃圾的现场采样,由垃圾的物理组成、含水率、低位热值全N、全P、全K含量以及垃圾中可堆腐物和筛下物中的重金属含量的测定结果,分析了应用填埋、焚烧和堆肥法对杨凌城区生活垃圾进行处置的可行性,对采用填埋、焚烧+填埋、堆肥+填埋处置生活垃圾的投资、社会等综合效益进行了分析。结果表明,焚烧+填埋的处置方式虽然在占用土地量、稳定化时间、减量化程度以及废物削减率等方面具有特殊的优势,但由于投资和处理费用过高,使这一方法在应用中受到限制。从技术、经济、政策等方面综合可虑,采用堆肥+简易填埋的处置方式是比较适合杨凌生活垃圾的特点。     

城市生物质废物厌氧消化处理可行性分析

城市废物传统的处理方式主要包括卫生填埋、焚烧和堆肥,而近年来,随着城市生活垃圾中生物质废物的增加以及世界能源短缺现象的加剧,具有废物处理和资源回收双重效益的生物质废物厌氧消化技术日益受到世界各国的广泛关注。文章分析了我国城市生物质废物的种类和性质,指出了采用目前的三种传统废物处理方式处理我国城市生物质废物的弊端,并提出了利用厌氧消化技术处理城市生物质废物的适用性,对比分析了上述四种废物处理方式的优缺点,并从政策方向性、技术工艺可靠性、原料和市场稳定性,以及环境、经济和社会效益优良性等多方面对城市生物质废物厌氧消化技术的可行性进行了分析,说明厌氧消化技术必将成为未来生物质废物资源化处理的发展趋势。